Face Mask Melt Blown Cloth Extrusion Line
Product Description
Melt-blown nonwovens is the most core material of mask, melt spraying cloth mainly uses polypropylene as the main material, the fiber diameter can reach 1 ~ 5 micron. The microfiber with unique capillary structure increases the number and surface area of fiber per unit area, so that the melt spray cloth has good filtering, shielding, insulation and oil absorption.
Melt-blown nonwovens can be used for air, liquid filtration materials, isolation materials, absorption materials, mask materials, warm materials, oil absorption materials and wiping cloth and other fields.
Details Technical Data:
Technical Parameters | |
Product coil width | 600mm |
Coil length | 2000m |
Product width | 175mmx3 (adjustable) |
Gram weight range | 25-45g / ㎡ |
Production capacity | 300kg / d (able to produce 300000 masks) |
Production speed | 10m / min |
Total power | 66kw |
Power supply voltage | 380V 50HZ +/- 10% amplitude |
Air source pressure | 5bar-7bar |
Space required | 9m * 2.5m * 2.2m |
Configuration parameters | |
Control system |
XINJE |
Servo motor | |
Touch screen | |
Low-voltage electrical installation | Schneider |
Hydraulic system | Taiwan JUFAN |
Extruder extrusion type | single screw extrusion |
Filter screen changing device | hydraulic drive, automatic switching |
Solution pump | Servo-driven precise control |
The meltblown nonwoven making process uses high-speed hot air to draw a thin stream of polymer melt extruded from the spinneret of the die, thereby forming ultra-fine fibers and condensing on the curtain web, and relying on self-adhesion to become Non-wovens.
