Face Mask Production Melt Blown/Pp Nonwoven Fabric Cloth Machine Line

Polypropylene melt blown special material is based on polypropylene. It uses peroxide degradation and controlled rheology to improve the fluidity and molecular weight distribution of the resin. According to customer requirements, special polypropylene melt blown materials with a melt mass flow rate in the range of 300-1900g / 10min can be produced. The product is suitable for the melt-blown non-woven fabric forming process, and is the main raw material for the production of polypropylene melt-blown non-woven products. The most important inside the mask is the melt blown layer M, which is mainly used to isolate droplets, particles, acid mist, microorganisms and so on.

Product Details

General description:

1、Product size: PP melt blown fabric with width at 175mm and 350mm

2、Main Material: PP compounding material

3、Extruder type: SJ50/30 or SJ65/30 single screw extruder

4、Output capacity: 150-250kg/day

5、Electric power supply: 3phase, 380V;50Hz(customized)

6Production flow: Plastic mixer→Vacuum feeder→ single screw extruding & extrusion heads →Single disc winder

 

Specification

Vacuum loader and hopper dryer

1 set

SJ65/30 single screw extruder

1 set

Heating oven

1 set

Mold

1 set

Winder

1 set

Oven for cleaning the mold

1 set

Screw type of Air compressor

1 set



Hot Tags: face mask production melt blown/pp nonwoven fabric cloth machine line, China, manufacturers, suppliers, factory, buy, cheap, quotation, low price, made in China

Inquiry

You Might Also Like