PP Material Meltblown Nonwoven Fabric / Cloth Production Line

This production line is a melt-blown PP electret filter material production line, which is used to produce PP melt-blown cloth. The melt-blown nonwoven fabric production line uses polypropylene pellets as raw materials and undergoes high-temperature melting, spinning, fiber formation, fiber cooling, and winding processes to manufacture melt-blown nonwoven fabrics. Contains a complete set of meltblown systems, electrical control systems, high-voltage electrostatic electret systems and a series of complete equipment. This production line is suitable for the melt-blown non-woven fabric forming process and is a mechanical device for producing melt-blown filterable non-woven products.

Product Details

melt-blown PP electret filter material production line:
This production line is a melt-blown PP electret filter material production line, which is used to produce PP melt-blown cloth. The melt-blown nonwoven fabric production line uses polypropylene pellets as raw materials and undergoes high-temperature melting, spinning, fiber formation, fiber cooling, and winding processes to manufacture melt-blown nonwoven fabrics. Contains a complete set of meltblown systems, electrical control systems, high-voltage electrostatic electret systems and a series of complete equipment. This production line is suitable for the melt-blown non-woven fabric forming process and is a mechanical device for producing melt-blown filterable non-woven products.
The vacuum feeder automatically sucks the polypropylene and sends it to the screw extruder. The extruder heats and melts the PP particles to the liquid state. Compressed air from the blower or air compressor and air storage tank is sent to the air heating tank for heating. The hot air is used to make the polypropylene material melted into a liquid form a filament through the nozzle (the nozzle contains hundreds of small holes ), After which the spun filament level reaches the net machine, and then reaches the winding equipment.
Equipment Introduction
Equipment use
mask melt blown cloth
Product weight
10~100g/m²
Meltblown fiber thickness
2-5μm
Product uniformity
CV value ≤6%
Product performance
Meet the relevant standards of KN95 and BFE
Applicable materials
PP
Compressed air demand
>0.65MPa,>1m3/min
Water demand
>0.2MPa,>0.2m3/h
Equipment capacity
 400KG / 24 hours
nozzle width
600MM
Working voltage
three-phase 380V 50HZ
total installed power
100KW
Equipment area
10 meters long and 4.5 meters wide



Inquiry