The line is designed and manufactured by introducing and absorbing foreign advanced techniques,and by improving domestic equipment inadequacies-It is suitable for forming,and rolling various flat yarn of thermoplastic plastics,such as the polypropylene,high density polyethylene and linear low density polyethylene,etc.
With section heating measurement
Automatic screen exchanger
Easy to clean and replace the filter screen
Melt blowing machine
One into three
3 coils synchronize
Melt blown nonwoven fabric macking machine
1) The whole line is well structured and easy to operate.
2) The whole line is highly automated.
3) Control elements are of well-know make, high performance and reliable technologies.
4) The whole line are controlled by PLC and operated with touch-screen.
5) The allocation of the main frame and auxiliary equipment can be Special designed and adjusted according to customer's requirement.
6) Fianl meltblown nonwoven fabric is widely used to make mask, surgical gown and water filter, it has very good filtration.
Product coil width
Gram weight range
25-45g / ㎡
300kg / d (able to produce 300000 masks)
10m / min
Power supply voltage
380V 50HZ +/- 10% amplitude
Air source pressure
9m * 2.5m * 2.2m
Low-voltage electrical installation
Extruder extrusion type
single screw extrusion
Filter screen changing device
hydraulic drive, automatic switching
Servo-driven precise control
The meltblown nonwoven making process uses high-speed hot air to draw a thin stream of polymer melt extruded from the spinneret of the die, thereby forming ultra-fine fibers and condensing on the curtain web, and relying on self-adhesion to become Non-wovens.