Lianguan Foam Cold Compactor Machine---experts In The Field Of Waste Foam Recycling

- Dec 02, 2019-

The principle of lianguan foam cold compactor machine is to compress the foam into blocks with spiral compression mechanism. When used, the operator just throws the foam block into the hopper, and the machine has a shredding mechanism to crush the foam block, and then the screw mechanism compresses the small piece of foam into a compression block with a square section. Foam compacting machine can be used in cold pressing, hot pressing, hot melt, hydraulic and other commonly used forms. There is a pressure regulating device at the front end of the compression section to adjust the compression ratio. According to the characteristics of raw materials, the compression ratio can reach 30~40 times, so as to reduce the volume of foam, so as to facilitate long-distance transportation and recovery of granulation.


The structure of EPS foam compactor machine is:

1. the foam outlet part can be customized according to the different raw material density of customers, lianguan foam pressing machine is designed for customers to accelerate the foam blanking of the pressing bar and suppress the excessive fast baffle, and customers can choose according to their own conditions.

2. For the material part of screw rod, high carbon chromium bearing steel is used, which not only improves the wear resistance of the whole screw rod, but also relatively improves the rust resistance of the screw rod and improves the life of the screw rod;

3. temperature control part, according to the problems of customers in practice, the temperature control device is added to the environmental protection foam block machine, which avoids the trouble of the wiring of the main engine, and solves the problem of measuring temperature. Now it can accurately know the degree of the upper and lower screws, and can adjust the temperature of the upper and lower screw according to the fineness of the particles, so that it can be used scientifically and well. The raw materials are transparent, so that they will not burn or melt;

4. In the grinding head part, the double screen changing machine head is adopted, which solves the problem that the original machine is not compared in the screen changing shutdown and reheating, not only saves time but also saves cost; at the same time, according to the customer's demand, the hydraulic screen changing grinding head is produced, which is characterized by "no leakage of material, energy saving, time saving and easy operation", which greatly improves the output of the equipment;

5. the safety part, making equipment should first consider the problem of no danger. When the foam granulation machine is working, the first is the high temperature scalding problem, and the other is the circuit problem. First, the high temperature scald. When buying, the first thing to consider is whether the workers can touch the heater when the equipment is working, and whether the circuit is secure when working, and the equipment is equipped with a full set of high protection. Warm and safe. Motor parts, the fast running motor belt of foam machine is easy to cause problems. We use a full package shield, which not only ensures the stability of the motor while running, but also adds a lot of color to the whole machine.

The automatic waste foam cold pressing machine features: non-toxic, odorless, green and environmental friendly. The machine can be operated on the vehicle, convenient and efficient.