Operation And Usage Of Hydraulic Foam Cold Press Machine

- Dec 02, 2019-

In the production of foam cold pressing, proper operation of foam cold press can effectively improve product quality and efficiency, and at the same time, it will greatly help improve the service life of foam cold press.

Operation procedures of hydraulic foam cold presser:

1, in the use of foam cold press, we should pay attention to all kinds of buttons on the machine, especially the "up", "down" and "emergency switch" three. They are used in emergency situations. If there is no special case, try to avoid touching them.

2, when using foam cold pressing machine to suppress hollow plate and solid board, it is necessary to know that their pressure is different. Proper operation of foam cold press needs to change the pressure according to the size of the panel surface, so as to avoid waste of capacity.

3, proper operation of foam cold pressing machine, including daily maintenance of foam cold press, cleaning up on time, ensuring the cleanliness and smoothness of the upper and lower iron plates, and avoiding damage to the processing products during the pressing process.

4, every time when we operate the foam cold press machine, we need to prepare all kinds of accessories in advance, avoiding the lack of material in processing, which not only affects the quality of the pressing products, but also has a certain impact on the production efficiency.

5. During the operation of the machine, it is forbidden to place hands and body under the pressing plate to prevent personal injury and industrial accidents.

6, the foam cold presser should be specially guarded to prevent accidents during operation. If an accident occurs, the emergency switch should be pressed immediately to stop the accident.