The CF-HCP hydraulic compacting line can compact the material to 350-400kg/m3. The customer can get the material in higher density, easy to stack, to increase transportation efficiency.
Technical Parameters：
Model | CF-CP Line | CF-HCP |
Screw diameter | Φ350mm | Φ350mm |
Input size | 1000mmx900mm | 1000mmx900mm |
Screw rotation speed | 42rpm | 42rpm |
Crusher blades | 10+11+10+11sets | 10+11+10+11sets |
Crusher blade rotation speed | 120rpm | 120rpm |
Main motor | 15kw | 15kw |
Crusher motor | 2.2 kw*4sets | 2.2 kw*4sets |
Hydraulic motor | 1.5kw | 15kw |
Production size | 380x380mm | 400x400mm |
Brief Introduction:
Foam cold press is a mechanical and environmental protection equipment that compresses foam plastics according to the pressure generated by screw rotation. It can reduce foam volume, increase density, facilitate foam recovery and foam treatment.
The foam cold press is divided into two categories: EPS foam cold compressor and polyurethane cold compression compressor, which are respectively suitable for recycling and processing of EPS/EPP/EPE foam and refrigerator polyurethane foam. The polyurethane foam is more dense than EPS/EPP/EPE foam plastics, and is processed by polyurethane foam compression compressor equipment. The effect density compression ratio is 10-16:1, which is convenient for polyurethane foam landfill. After EPS/EPP/EPE foam is compacted by foam press, the density increases, forming a square block, which is convenient for transportation and storage.
CF-HCP Line, the environmental protection foam cold press of Lian Guan, has upgraded the oil pressure device as the upgrade of the CP series. It is characterized by breaking, storing, compacting and discharging foams to achieve automation and continuity. Especially for EPE expanded polyethylene foam, it can effectively prevent crushing and compression of EPE from loosening again.
With the development of the times, the foam cold pressing machine must keep pace with the times. We must upgrade the production technology, and introduce advanced technology such as high technology and automation. The application of foam cold press to automation technology can speed up the work efficiency and reduce the cost of personnel to a maximum extent.
The foam cold press adopts the principle of screw propelling compression mechanism, which is easy to operate and durable. It effectively solves the problems of small volume, difficult recovery and inconvenient transportation of EPS/EPP/EPE foam plastics and polyurethane foam plastics. The equipment has high compression ratio, and cold pressure treatment does not need to add other chemical products and no odor.
