Styrofoam Compactor For Recycling

Styrofoam Compactor For Recycling

The CF-HCP hydraulic compacting line can compact the material to 350-400kg/m3. The customer can get the material in higher density, easy to stack, to increase transportation efficiency.

Product Details

The CF-HCP hydraulic compacting line can compact the material to 350-400kg/m3. The customer can get the material in higher density, easy to stack, to increase transportation efficiency.

   

Technical Parameters

Model

CF-CP Line

CF-HCP

Screw diameter

Φ350mm

Φ350mm

Input size

1000mmx900mm

1000mmx900mm

Screw rotation speed

42rpm

42rpm

Crusher blades

10+11+10+11sets

10+11+10+11sets

Crusher blade rotation speed

120rpm

120rpm

Main motor

15kw

15kw

Crusher motor

2.2 kw*4sets

2.2 kw*4sets

Hydraulic motor

1.5kw

15kw

Production size

380x380mm

400x400mm


EPS Compacting Recycling Line 200-300kg/h

The Description of EPS Compactor

1, Compaction System suitable for EPS EPP EPE XPS.

2, Application: COMPACTOR is used to compact the plastic waste like EPS EPP EPE XPS. The good reduction in volume can be achieved in this manner to save transport and disposal cost.

Compressed block can be reused as high quality granulates by recycling companies and other related manufacturers.

3, Processing Method: The operator throws plastic waste into hopper of the machine, and then the pre-breaker with two rotating knife shafts will crush it into 10~50mm pieces, which are forced by a screw into the pressure channel.

4, Technical Characteristics:

The motor for pre-breaker and screw compactor: Gear reducer and Cyclonidal pinwheel reducer can be optional.

The compressed drive: Hydraulic, Pneumatic and Electrical motor can be optional.

The module design can meet the individual request.

Automatic pressing control device (optional).

The pressure channel is made of stainless steel instead of iron without leaving traces of rust (optional).

Automatic cut off if the machine runs empty(optional).

Switch cabinet has modern PLC and touch screen unit(optional).

It can be fed by hand, conveyor or silo.

 

The EPE/EPS foam cold press is a mechanical environmental protection equipment that compresses foam plastics according to the pressure generated by screw rotation. When used, the operator only needs to pour the foam into the hopper and crush the screw through the equipment crashing and crushing mechanism. After the screw mechanism is processed, the square foam compressing block is produced. Double reduction of foam volume and increase of density will facilitate foam recovery and utilization.

Features of EPE/EPS foam cold press equipment:

1. Non-toxic, odorless. Green environmental protection.

2. cold compression type EPS briquetting machine, without heating, directly extruded and extruded EPS foam, refrigerator inner liner and PU foam cotton.

3. Compression ratio is large, which can reduce capacity by 50 times, Foamed cotton reduces capacity by 8 times.

4. Saving storage space and transportation and storage costs.

5. Compressed EPS material is easy to recycle.

6. The large-scale machine can operate synchronously with the conveyor belt to improve production efficiency.

 


Hot Tags: styrofoam compactor for recycling, China, manufacturers, suppliers, factory, buy, cheap, quotation, low price, made in China

Inquiry

You Might Also Like