Expanded Polystyrene Melting Production Line

This machine with crushing and thermoforming for EPS block, it is a very practical and economical machine for EPS recycling.

Product Details

Expanded Polystyrene Melting Production Line

   


Introduction of Expanded Polystyrene Melting Production Line

1. This machine with crushing and thermoforming for EPS block, it is a very practical and
economical machine for EPS recycling.

2. Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by the twinshaft blades and conveyed to the barrel of the main machine through the screen.

3. The screw of the main machine can convey and heat the material to melt condition, then extrude them and hydraulic blade cut them to pieces for easy storage and transportation.

4. The shapes of the products can be designed according to customers' requirements.


Working principle of Expanded Polystyrene Melting Production Line

The twin shaft crushing blades are two parallel blade shafts with different rotation

direction. Each blade shaft has 18 blades and is driven by the gear box to crush material that will be conveyed to the barrel through the screen. The material will be sent by the high speed rotary screw to the heating barrel. Then they will be melted under high temperature and extruded to expected shapes.


Model: Foam hot melting line CF-NHM

Capacity: 80-250kg/h

Compression ratio: 90:1

Processing objects: EPS foamed polystyrene, EPS lunch box, EPS dust, XPS insulation board, EPE foamed polyethylene, EPP foamed polypropylene

The CF-NHM type foam melting machine is designed to solve the problem of dry foam EPS volume reduction through crushing, hot melt and extrusion molding. The machine is simple in design, compact in structure and low in maintenance cost.

Lian Guan Recycling foam melting machine CF-NHM type foam hot melt machine volume reduction of up to 90 times. When the crusher blade is working, it breaks into smaller pieces by cutting the blade. The material will be pushed to the heating cylinder by a high-speed rotating screw. The screw of the main engine can be conveyed and heated to make it reach the hot melt state. Then it is extruded and cut into a piece of molten block by hydraulic cutter. It is more convenient for storage and transportation. Below, we introduce the relevant parameters of the environmental protection foam melting machine and the conveyor belt. The material will be pushed to the heating cylinder by a high-speed rotating screw. The screw of the main engine can convey and heat the material to reach the hot melting state, then extrude it and cut it into lumps by hydraulic cutter, which is more convenient for storage and transportation.


Expanded Polystyrene Melting Production Line Technical parameters:

model 

CF-NHM200

CF-NHM400

screw diameter

Φ190-120mm

Φ190-120mm

capacity

80-120kg/h

180-200kg/h

screw speed

110rpm

110rpm

filter diameter

50mm

50mm

main motor power

15kw

22kw

crusher motor power

2.2 kw*2sets

2.2 kw*4sets

crusher knife quantity

9+10sets

10+11+10+11sets

material outlet size

110*110*960mm

130*130*960mm

material outlet density

800-1000kg/cbm

machine weight

1800kg

2500kg


Inquiry