EPS Hot Melting Machine
Model: EPS hot melting machine CF-HM
Capacity: 50-200kg / h
Compression ratio: 90:1
Treatment object: EPS expanded polystyrene, EPS lunch box, EPS dust, XPS insulation board, EPE expanded polyethylene, EPP expanded polypropylene
The CF-HM series eps hot melting machine is widely used in foam packaging industry, fishery, food processing and packaging of vegetables and fruit products, and further compresses the foam into 90 parts of the original volume, reducing the compression ratio to 90:1, saving transportation and storage costs. It is the plasticization of the waste foam crusher after being crushed by the screw heating system, and the heat is fused into a lump. It is convenient to transport and sell high quality recycled granulated raw materials.
Transport
1. Forklift is required to transport the machine, and its load shall not be less than 2.5 tons.
2. When moving the machine, be careful to protect the packaging of the machine from damage.
3. During the transportation of the machine, do not let the machine have violent impact, and keep away from water and other corrosive liquids.
Storage
1. Do not make the machine work at an altitude of more than 1000 meters.
2. The ambient temperature shall be - 10 ℃ - + 40 ℃ rectifier transformer, and the ambient temperature shall not exceed + 40 ℃ and shall not be lower than the freezing point temperature for normal operation.
3. The maximum relative air humidity is 90% (at air temperature of 20 ± 5 ℃).
Technical Parameters：
Model | CF-HM100 | CF-HM200 | CF-HM400 |
Screw diameter | Φ138mm | Φ190-120mm | Φ190-120mm |
Feeding size | 650mmx400mm | 900mmx600mm | 1000mmx900mm |
Screw speed | 165rpm | 110rpm | 150rpm |
Heating power | 3kw | 10kw | 10kw |
Main motor power | 7.5kw | 15kw | 22kw |
Crusher motor power | 2.2 kw | 2.2 kw*2sets | 2.2 kw*4sets |
Vlades quantity | 8sets | 8+9sets | 10+11+10+11sets |
Machine weight | 600kg | 1500kg | 2200kg |
PACKING AND SHIPPING
Why Choose Us
1. The production time of EPS hot melting machine is about 30 days
2. The cost of the whole set of production equipment is cheaper and the performance is higher.
3. It is easy to operate and can be put into production immediately after getting the machine.
FAQ
Q1:Do you have any reference project?
>> A1:We have reference project in most countries, and you can visit their factories if we get the permission of the customer. Or I can provide the running vedio for your reference.
Q2:What's your guarantee of the quality if we buy your machines?
>>A2:We offer you high quality machines with 1 years guarantee. we will give u spare part free in 1 years.
Q3: Do you provide customized service?
>> A3: We will customize the machine according to your needs, material , power, capacity, and so on.
Q4:When can I get my machine after I paid?
>> A4:We will deliver the machines on time as the date we agreed both side.
Q5:How can I install my machine when it arrives?
>> A5:We will send our engineer to your side as soon as you get all your machines ready for testing and teaching your technicians how to run the machines. During the epidemic, we can provide video remote guidance because you are not convenient to visit our factory.
