Waste EPS Recycling Machine
I. The use of Waste EPS Recycling Machine:
in recent years, waste plastics recycling, foam plastics in the packaging industry wide, large volume, difficult to transport, led to the rapid development of waste plastics recycling machinery, with the continuous adoption of new technologies, Hot melting machine for recycling EPS and production efficiency has been generally improved rapidly. The utility model has the advantages of high efficiency, space saving, easy transportation to complete products, environmental protection, pollution-free and smoke-free operation to avoid secondary pollution. Complete waste resource regeneration, create benefits.
II. Waste EPS Recycling Machine Working Principle
The use of two axis crushing knives in EPS COMPACTING HOT MELTER MACHINERY can effectively break the foamed polystyrene material into smaller pieces and enter the screen. Material can not be further broken into the screen mesh, fall into the screen mesh, and then enter the main machine through screw high-speed rotation, the crushed material will be conveyed to the conical cylinder and the circular cylinder, heated by mica heater, and then the melted material will continue to be conveyed to the moulding square die. Material begins to cool down, and the square object is extruded from the die. According to the required length, it will be automatically cut off by the cutting machine and finished.
III. Waste EPS Recycling Machine Technical Parameters:
Extrusion center height
Main motor power
Blade rotation diameter
Blades rotation speed
Difference and function between waste foam cold press and foam hot-melt machine?
Foam cold pressing machine: also called horizontal self chopping crushing and extruding machine, it compresses foam plastics according to the principle of screw rotation and compacts the mechanical environmental protection equipment. After this machine, it can reduce foam volume and increase density, which is conducive to foam recycling and polyurethane foam landfill treatment.
Foam hot-melt machine: it is used to heat and plasticized waste foam particles, extruding, drawing and cutting into foam particles.
The characteristics of the foam machine are:
1. all recovered waste foam can be produced without cleaning after classification.
2. From crushing of raw materials, feeding to granulation are all automated.
3. Make full use of high-pressure friction uninterrupted heating system, automatic heating production, avoid continuous heating, save electricity and energy.
4. Screw barrels are made of 38crmoal, durable.
5. Electromechanical separation, simpler operation, safer use.