Pet Bottle Crushing Machine:
1. the pet bottle crusher of our company have many advantages, like high capacity, high reliability, over-loading protection, long service time, easy replacement of wear and spare parts, less costly and easy to install, simple structure and easy to operate.
2. the blade base and blade on the rotary roller can be dis assembly, it is easy to clean and maintenance. the rotary blade adopt the V design, it can decrease the noise and decrease energy consumption.
3. the main axis is drive by gearbox, its running very stably, low noise and strong power. the screen can be changed according to the customers' specific requirements.
4. the capacity that we can do should be 300kg/h---3000kg/h.
Pet Bottle Crushing Machine Technical Parameters:
Model | Feeding size | Motor power | Rotating diameter | Qty of rotating knives | Qty of fixed knives | Mesh size | Rotating speed |
2660 | 634×437 | 15 | φ260 | 3×2 | 2×2 | φ8 | 584 |
3260 | 634×475 | 15 | φ320 | 3×2 | 2×2 | φ12 | 444 |
3280 | 834×475 | 22 | φ320 | 3×2 | 2×2 | φ12 | 627 |
4280 | 834×540 | 37 | φ420 | 3×2 | 2×2 | φ12 | 466 |
42100 | 1034×540 | 45 | φ420 | 3×2 | 2×2 | φ12 | 466 |
42120 | 1234×425 | 55 | φ420 | 3×2 | 2×2 | φ12 | 462 |
52100 | 1034×705 | 55 | φ520 | 5×2 | 2×2/2×3 | φ12 | 462 |
52120 | 1234×705 | 75 | φ520 | 5×2 | 2×2/2×3 | φ12 | 462 |
66120 | 1234×1080 | 90 | φ660 | 5×2 | 2×2/2×3 | φ12 | 462 |
66160 | 1634×1080 | 132 | φ660 | 5×2 | 4×2/4×3 | φ12 | 414 |
80160 | 1634×1000 | 160 | φ800 | 5×2 | 4×2/4×3 | φ12 | 414 |
80200 | 2034×1000 | 200 | φ800 | 5×2 | 4×2/4×3 | φ12 | 420 |
80240 | 2034×1000 | 250 | φ800 | 5×2 | 4×2/4×3 | φ12 | 415 |
How to Maintain Plastic Crusher
Plastic crusher is to use some unused items for crusher, and now plastic crusher is widely used in waste plastic recycling and recycling of factory corners, which is its use. Now the scientific and technological capabilities are constantly updated, in the market can also see various forms of plastic crusher, and we use any machine will become old, slowly out of trouble. At this time, we need to maintain it, only then their service life will be longer.
Maintenance of plastic crusher is as follows:
1. Plastic crusher should be placed in ventilation position to ensure the heat dissipation of motor and prolong its life.
2. Lubricating oil should be added to bearings regularly to ensure lubricity between bearings.
3. Check the tool screw regularly. After using the new plastic crusher for 1 hour, tighten the moving tool and fix the screw of the tool to strengthen the fixity between the blade and the tool holder.
4. In order to ensure the sharpness of the cutting edge, the cutting tool should be checked frequently to ensure its sharpness and reduce unnecessary damage to other parts caused by blunt blade.
5. When changing tool, the clearance between moving tool and fixed tool is 0.8MM for crusher above 20HP and 0.5MM for crusher below 20HP. The thinner the recycled material is, the clearance can be adjusted appropriately.
6. Before the second use, the remaining debris after the last use of the machine must be cleaned up to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to remove the ash outlet under the flange, because the powder discharged from the plastic crusher room enters the rotary bearing.
7. The machine should be well grounded.
8. Check regularly whether the belt of plastic crusher is loose and tighten in time.
