Heavy duty single shaft shredder/commercial plastic shredder/plastic recycling shredder/heavy duty plastic shredder
The design and application of this type of tear machine is mainly aimed at the customer's requirement of large capacity, good tear effect and good energy-saving effect for a single equipment.
The diameter of the main spindle of the equipment is 500 mm. The optimized square cutter cutting method is adopted to maximize the energy saving and uniform granulation of the equipment.
Because of the combination of "H" and "V" in the design and the powerful imported gearbox, the large machine is more powerful and energy-saving under low power consumption.
Because of the optimization of cutting mode and powerful imported gearbox, the equipment runs more smoothly and granulates more evenly.
ADVANTAGES:
1. Easy to clean/enter
Easy cleaning is the key point of the machine design. It is very easy to clean the machine before putting in new materials or colored materials. It only needs to remove a plate to enter the machine immediately.
2. Screen installation
Because the material is cut into the same size, the screen can not be installed when the tear machine is running, but if the particle size of the destroyed product is required, the screen should be installed as an optional accessory.
3. Convenient transportation
The standard elevated platform simplifies the connection device of material conveying. Conveyor belt conveying or winch conveying can be selected according to your needs.
4. Simple maintenance
The front end of the machine can be opened, so that we can quickly and easily enter the core parts of the machine. All cutters, rotating shafts and fixtures can be replaced in the shape of clamps, which is easy to maintain.
The followed is our models Single Shaft Shredder:
Model Item | WT2260 | WT3060 | WT3080 | WT4080 | WT40100 | WT40120 | WT40150 | WT48150 |
Dimension L/W/H(mm) | 1780* 1350*1754 | 2455* 1478*1700 | 2455× 1678×1700 | 2825× 1747×1875 | 2825× 2004×1875 | 2825× 2564×1875 | 2825× 2964×1935 | 3135× 2968×2105 |
Cutting Chamber C/D(mm) | 857*602 | 1200*600 | 1200×800 | 1410×800 | 1410×1000 | 1410×1200 | 1410×1500 | 1650×1500 |
Height of discharge port E(mm) | 546 | 500 | 500 | 500 | 500 | 500 | 560 | 600 |
Oil cylinder journey（mm） | 500 | 750 | 750 | 900 | 900 | 900 | 900 | 1000 |
Rotor Diameter(mm) | φ224.7 | Φ300 | Φ300 | Φ390.9 | Φ390.3 | Φ390.3 | Φ390.3 | Φ464.8 |
Main Shaft Speed （r/min） | 83 | 83 | 83 | 74 | 74 | 74 | 74 | 74 |
Screen Mesh(mm) | φ25 | Φ40 | Φ40 | Φ40 | Φ40 | Φ40 | Φ40 | Φ40 |
Rotor-knives(pcs) | 28+4 | 30+4 | 42+4 | 42+4 | 54+4 | 66+4 | 90+4 | 90+4 |
Stator-knives(pcs) | 2+2 | 2 | 2 | 2 | 2 | 2 | 3 | 3 |
Main Motor Power(kw) | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 |
Hydraulic motor power（kw） | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | 5.5 | 5.5 | 5.5 |
Machine weight（kg） | 1400 | 1550 | 1950 | 3500 | 4000 | 5000 | 6200 | 7800 |
