PPPE Film Squeezing Machinery Technical Features:
This Wet film scrap squeezer dryer machine is used after the plastic film/plastic agricultural film/PP woven bags/Space bag/tons bags/thin waste plastics plastic sheets washed, using the squeeze dewatering principle, squeeze the water from the plastic by rotating screw. The water will flow out from the bottom.
Advantage of pppe film squeezing machinery:
1. Low power consumption. Main motor power between 45kw, no need to connection drying pipe system. Compare transitional horizontal dewatering machine+drying pipe system, can save power 40-50%
2. Small land occupied
3. Low rotation speed, almost no noise
4. Dewatering function is better, final products humidity about 15-20%
5. Mechanical squeeze dewatering, compared with the original hot air drying, do not need use dewatering machine, drying system, it can save the energy greatly.
PPPE Film Squeezing Machinery Technical Parameters:
TYPE | CF-FS-500B |
Outline | 4018×1520×3000mm |
Input | 1300X1300MM |
Motor power | 45KW-6grade |
Rotation speed | 35R/MIN |
Screw diameter | 480mm |
Water | Bottom drainage |
Gear box | ZLYJ type, bearing seat with special purpose |
Hydraulic power | 2.2KW, with pressure protection device |
Item | Standard configuration |
Motor | Dazhong |
Control | PLC Control SIEMENS |
Touch Screen | SIEMENS |
Gearbox | GUOMAO |
Bearing | ZWZ |
Electricity Elements | Main parts use SIEMENS Other parts use CHNT |