High Speed Mixer

It is used in mixing, stirring, drying, colouring and other processing of all kinds of materials in plastics、rubber、daily chemical and other industries.

Product Details

High Speed Heating Mixer

Uses and Features:

It is used in mixing, stirring, drying, colouring and other processing of all kinds of materials in plastics、rubber、daily chemical and other industries.

The technology of main shaft sealed apparatus has got the state patent with NO: ZLP6243064 and two layers of sealing technology adopted in the pot cover.
It has self-friction heating and electric heating modes and many others.
The discharging mode adopted the ways of temperature-automatic control and the manual control.
Its blades casted by stainless steel have been passed the test of dynamic and static balance precisely.
The electrical control adopted the well-known components.

 

High Speed Mixer Main technical parameters:

model

capacity(L)

effective capacity(L)

motor power(kw)

Main shaft speed(rpm)

Discharge method

SHR-10A

10

7

3

2000

Manual or automatic

SHR-25A

25

18

5.5

1300

Manual or automatic

SHR-50A

50

35

7/11

750/1500

Manual or automatic

SHR-100A

100

75

14/22

650/1300

Manual or automatic

SHR-200A

200

150

30/42

475/950

Manual or automatic

SHR-300A

300

225

40/55

475/950

Manual or automatic

SHR-500A

500

375

55/75

430/860

Manual or automatic

SHR-800A

800

600

83/110

357/714

Manual or automatic

SHR-1000A

1000

750

110/160

325/650

Manual or automatic

SHR-1300A

1300

910

132/200

300/600

Manual or automatic

SHR-1500A

1500

1100

160/220

250/500

Manual or automatic


Cautions for Use and Maintenance of Mixers

High Speed Mixer

It consists of bottom feeding blade pulp and high speed granulated blade pulp. The feed blade slurry continuously feeds the bottom material upward along the cylinder wall. High-speed crushing blade pulp crushes the materials sent by the material blade pulp thoroughly. It makes the material circulate to form a whirlpool shape, and achieves the purpose of mixing the material uniformly in a short time.

Work maintenance should pay attention to the following matters:

1. Be sure to follow the operation rules of the equipment, which is good maintenance of the equipment.

2. Attention should be paid to the mixing of feeding materials after the normal start-up of the equipment, and the feeding should be added slowly according to the required sequence.

3. Prepare sealing rings, rubber rings for coupling, V-belt and rolling bearings. These parts are easy to break down and should be replaced in time if necessary.

4. Check whether the fasteners of the tendons are loosened regularly < the first quarter of the year in general; check the tightness of the installation of the V-belt of the tendons; and clean up the dirt and dust in all parts of the equipment.

Maintenance can generally be carried out once a year. The following points should be noted:

1. The clearance between the stirring paddle, scraper and the wall of the mixing chamber should meet the requirements of the table below.

2. Remove all rolling bearings, clean and inspect the tendons, and replace the worn parts. Replace grease and seal ring.

3. Check whether there is any bending or wearing of the main drive shaft of the tow.

4. Check the cylinder for cleaning, replace the vulnerable parts of the sealing ring and guide sleeve, and check whether there is bending deformation and wear of the rod.

5. Record the main parts after inspection, test if necessary, prepare the parts and components, and propose the next maintenance and replacement.


Hot Tags: high speed mixer, China, manufacturers, suppliers, factory, buy, cheap, quotation, low price, made in China

Inquiry

You Might Also Like