Plast Mixer Machine
Zhangjiagang Lianguan Recycling Science Technology Co,.LTD , successor of Former Baixiong Group, is specialized in producing plastic machines. This company has passed the ISO9001, listed in Zhangjiagang Top 100 companies, Jiangsu province High and New Tech Companies and now it is most sizable production base for plastic mixers,whose products and services are exported to many areas and regions including Canada,Russia,Saudi Arabia, Iran, Malaysia,USA, Japan etc.
Lianguan’s mixing blades in the high speed mixer have passed dynamic balance tests. Barrel wall undergoes precise grinder. contactors adopts Siemens. thermo control meters adopt Omron from Japan. Main shaft seal is nationally patented (patent number: ZLP62430641) which ensures no material leakage between main shaft and barrel wall(3 years).
Plast Mixer Machine Main Technical Parameters:
model | capacity(L) | effective capacity(L) | paddle speed(rpm) | motor&heating power(kw) | Gas consumption | Discharge method | Outlook size(mm) | Weight（T） | mixing time m/pot | Remark | |
heat | cool | ||||||||||
SRL-Z50/100 | 50/100 | 32/75 | 750/1500-180 | 7/11-5.5 | ≤0.3 | Manual or automatic | 2300/1800/1900 | 1.8 | 8-10 | 6-8 | The specific mixing time depends on different process, formula and raw materials. |
SRL-Z100/200 | 100/200 | 75/160 | 650/1300-180 | 14/22-7.5 | ≤0.3 | Manual or automatic | 2500/2000/2200 | 2.5 | 8-10 | 6-8 | |
SRL-Z200/500 | 200/500 | 150/320 | 475/950-87 | 30/42-11 | ≤0.35 | Manual or automatic | 4580/2240/2470 | 3.6 | 8-10 | 6-8 | |
SRL-Z300/600 | 300/600 | 200/360 | 475/950-87 | 40/55-11 | ≤0.35 | Manual or automatic | 4580/2240/2500 | 4.5 | 8-10 | 6-8 | |
SRL-Z300/1000B | 300/1000 | 200/640 | 475/950-60 | 40/55-11 | ≤0.35 | Manual or automatic | 4600/3000/4050 | 4.9 | 8-10 | 6-8 | |
SRL-Z500/1000A | 500/1000 | 375/650 | 430/860-60 | 55/75-18.5 | ≤0.5 | Manual or automatic | 4600/3000/4050 | 5.8 | 8-10 | 6-8 | |
SRL-Z500/1600B | 500/1600 | 375/1200 | 430/860-60 | 55/75-18.5 | ≤0.5 | Manual or automatic | 4600/3000/4050 | 6.5 | 8-10 | 6-8 | |
SRL-Z800/1600A | 800/1600 | 600/1024 | 357/714-60 | 83/110-22 | ≤0.6 | Manual or automatic | 6230/4230/4480 | 8.3 | 8-12 | 6-10 | |
SRL-Z800/2500A | 800/2500 | 600/1500 | 357/714-50 | 83/110-30 | ≤0.6 | Manual or automatic | 4850/3860/6550 | 8.8 | 8-12 | 6-10 | |
SRL-Z1000/3000A | 1000/3000 | 700/1800 | 325/650-50 | 110/160-37 | ≤0.6 | Manual or automatic | 4930/4150/6850 | 11.5 | 8-12 | 6-10 | |
Maintenance methods of plastic mixer are complex, which can be summarized as the following steps:
1. check whether the power supply is normal and whether the reducer has oil before use. After checking, turn on the power supply, press the start button (pay attention to the direction of operation), adjust the timer, put in the material, close the cover and fasten the handle, then run the mixing for about 3-5 minutes.
2. Shake the machine to 100 degrees to remove raw materials and clean.
3. After the work is finished, close the outlet and extraction plate, turn off the power supply and keep the room clean.
4. According to the degree of use, ZL-2 lithium-based grease should be added to the reducer for 1-3 months, and 20# oil should be added to the bearings once a week.
5. lock the screw on the base of reducer every week, check it and lock it.
