High Speed Hot Cold Mixer Machine
pppe pellet mixer/plastic mixing equipment/high speed heating mixer/plast mixer machine
1. High capacity
2. Easy to operation
3. has state patent NO.ZLP62430641
4. SS304 material
5. Certification: ISO9001:2000 CE
FEATURE AND FUNCTION:
● SRL-W series mixer unit is widely used in mixing, drying, coloring and other processing. It is the most ideal equipment for producing shaped plastic material and plastics pipes.
● The technology of the main shaft sealed apparatus has got the state patent with NO.ZLP62430641 and it has two functions of electric and steam heating.
● Two layers of sealing technology is adopted in the pot cover. The opening of the heating mixed cover adopted the air opening device and the opening of the cooling mixed cover adopted hydraulic pressure control system.
● The electric control section with the programmable logic control adopted well-know imported meters ● It is equipped with the pulse dust-cleaning recovery device.
● The blades have been passed the test of the dynamic and static balance testing machines.
● You may choose the simple and easy feeding system.
Plast Mixing Machine Main Technical Parameters
Effective volume (L)
Motor power (KW)
Main shaft speed(rpm)
Use and maintenance
Before the machine is tested, it should be carefully checked whether the power supply connected to the machine is consistent with the requirements of the machine. All parts are fully installed, and the circuit connected during the installation inspection is correct. Each lubricating point should be filled with the specified lubricating oil (fat) to wipe off the rust preventive oil throughout the machine.
The mixer should start from the no-load start, then carry out the load test, and check whether the pneumatic part is normal, and whether the discharge door is properly opened and closed. After the test run, it is put into production.
After the machine is used, if it is not used for a short time, carefully clean the inner wall of the pot and the stirring paddle. When not in use for a long time, it should be coated with anti-rust oil.
Requirements for each lubrication point: