Plastic Mixer Dryer
Zhangjiagang Lianguan Recycling Science Technology Co,.LTD, successor of Former Baixiong Group, is specialized in producing plastic machines. This company has passed the ISO9001, listed in Zhangjiagang Top 100 companies, Jiangsu province High and New Tech Companies and now it is most sizable production base for plastic mixers,whose products and services are exported to many areas and regions including Canada,Russia,Saudi Arabia, Iran, Malaysia, USA, Japan etc.
Lianguan’s mixing blades in the high speed mixer have passed dynamic balance tests. Barrel wall undergoes precise grinder. contactors adopts Siemens. thermo control meters adopt Omron from Japan. Main shaft seal is nationally patented (patent number: ZLP62430641) which ensures no material leakage between main shaft and barrel wall(3 years).
Plastic Mixer Dryer Main Technical Parameters:
model | capacity(L) | effective capacity(L) | paddle speed(rpm) | motor&heating power(kw) | Gas consumption m3/min | Discharge method | Weight(T) | mixing time m/pot | Remark | |
heat | cool | |||||||||
SRL-W500/2000 | 500/2000 | 375/1200 | 430/860-80 | 55/75-18.5 | ≤0.6 | Manual/automatic | 7.7 | 8-10 | 6-8 | The specific mixing time depends on different process, formula and raw materials. |
SRL-W800/2500 | 800/2500 | 560/1024 | 357/714-80 | 83/110-22 | ≤0.6 | Manual/automatic | 8.3 | 8-12 | 6-10 | |
SRL-W1000/3500 | 1000/3500 | 700/2000 | 325/650-80 | 110/160-37 | ≤0.7 | Manual/automatic | 11 | 8-12 | 6-10 | |
SRL-W1300/4500 | 1300/4500 | 910/2450 | 300/600-80 | 132/200-37 | ≤0.7 | Manual/automatic | 12.5 | 8-12 | 6-10 |
Maintenance of Mixer and Principle and Application of Mixer
In the granular mixer, the speed of the impeller blade is not high and the working load is not large, so there are few breakdowns in the normal work.
In peacetime work, maintenance and maintenance should pay attention to the following matters:
It must be carried out according to the operation rules of the equipment, which is the best maintenance for the equipment.
(2) Pay attention to the mixing of feeding after the normal start-up of the equipment, and the feeding should be added slowly according to the required sequence.
(3) Prepare rubber rings, V-belts and rolling bearings for sealing rings, couplings. These parts are easy to break down and should be replaced in time if necessary.
(4) Check whether the fasteners are loosened regularly < the first quarter of the year in general; check the tightness of the V-belt installation; and clean up the dirt and dust in all parts of the equipment.
Maintenance of the mixer can generally be carried out once a year. Attention should be paid to the following points:
The clearance between the stirring paddle, scraper and the wall of the mixing chamber should meet the requirements of the table below.
(2) Remove the rolling bearings, clean and inspect the tendons, and replace the worn parts. Replace grease and seal ring.
(3) Check whether there is bending or wearing phenomenon in the main drive shaft of the tendon.
(4) Check the cylinder for cleaning, replace the vulnerable parts of the sealing ring and guide sleeve, and check whether there is bending deformation and wear of the rod.
Record the main parts after inspection, test if necessary, prepare the parts and components, and propose the next repair and replacement.
Mixed machinery is widely used in pharmaceutical, food, chemical, agricultural, construction and other industrial production and daily life.
Mixer can mix many kinds of materials into a uniform mixture, such as in the pharmaceutical industry, the raw materials of different components can be evenly mixed together to form a compound; it can also increase the contact surface area of materials to promote chemical reaction; it can also accelerate physical changes, such as adding solvents to granular solutes, through the role of mixing machinery can accelerate the dissolution and mixing.
The commonly used mixing machines are divided into four categories: gas and low viscosity liquid mixer, medium and high viscosity liquid and paste mixer, thermoplastic material mixer, powder and granular solid material mixer.