Foam pelletizing machine (automatic foam pelletizing machine) is also called foam granule machine.
The complete set of equipment consists of three parts: foam pulverizer, foam extruder and pelletizer. It adopts multiple mechanical connection design and the whole production line. Automated operation, saving two-thirds of the work, this design has been highly praised by customers. Foam pelletizing machine is mainly used for recycling and recycling of all kinds of waste foam and pearl cotton, such as various electrical packaging foams, used lunch boxes, foam corner scraps, etc., which can be reused after being simply processed by foam pelletizing machine. The PS recycled particles, this recycled particle is very widely used and the market is in urgent need.
EPS Foam Pelletizer Extruder Recycling Machine features:
1. The new generation foam pelletizing machine adopts the latest technology, the latest design, beautiful appearance and convenient use.
2. The foam pelletizing machine has complete supporting facilities and can be continuously and continuously produced. It is automated from raw material crushing, drawing and cutting into pellets.
3. The complete foam pelletizing machine has a small footprint, low power consumption, high quality finished products and wide application range.
4. Adopt split power distribution system to ensure safer motor operation.
5. Make full use of the high-pressure friction continuous heating system, automatic heating production, avoiding the continuous heating of the heating system, more energy saving.
6. Both the screw and the discharge port are made of imported high-strength carbon structure lead steel, which is durable and not easy to deform.
EPS Foam Pelletizer Extruder Recycling Machine operation method:
1. The foam pelletizing machine has two heating coils on the upper and lower screws, and each heating coil has a switch, which can be opened and closed according to the temperature required during processing.
2. When the foam pelletizing machine is working, first heat the loading and unloading drum for 20-40 minutes, then take a piece of foam on the head and press it lightly. If the foam can soften and melt, it means that the cartridge has reached the working temperature (180 About degree), can boot work.
3. A small amount of foam is added to the hopper first. If the extrudate has melted, the material can be put into operation in large quantities. If the temperature is found to be too high during work, the head can be turned off and the heating power can be continued.
4. When the foam pelletizing machine is working, add one or two layers of 20-80 mesh filter or other suitable number of filters as required in the lower screw head (the higher the filter mesh number, the cleaner the impurity filter). The network should be prepared for more than a few, if the work is not smooth, indicating that the filter is blocked, it is necessary to replace the filter in time. The steel filter is fired to remove impurities and can be recycled.
EPS Foam Pelletizer Extruder Recycling Machine Main technical parameters:
4 poles 11kw
4 poles 18.5kw
4 poles 15kw+7.5kw
4 poles 18.5kw+7.5kw