The extruding water ring die face cutting granulating line is for plastics such as LDPE, HDPE, PP, recycling granulating ( pelletizing ) .
Processing capacity from 150kg/h to 500kg/h
1. The extruding water ring die face cutting granulating line, very suitable to process PVC powder with high capacity
2. Pelletizing style: hot-cutting on mould face, even cutting ensures good shape.
3. Auxiliary machine: pellets cooling & classifying
High Capacity Pppe Films Granulating Line Technical Parameters:
Extruder, single stage or mother-baby two stage , with hydraulic screen changer
Water ring die face cutting unit
Blowing conveyer and silo
Electric control cabinet
Inspection in Operation of Plastic Granulator
(1) No sundries are allowed in the material. Hard objects such as metal and sand are strictly prohibited from entering the hopper.
(2) When opening the exhaust chamber or silo cover, foreign bodies should be strictly prevented from falling in.
(3) The screw is only allowed to start at low speed. The idling time is not more than 2 minutes. Only when the screw is fed in time can the speed of the screw be gradually increased.
(4) Check every lubricating part and oil level regularly, replace all new oil after acceptance, and then replace lubricating oil once every 3000 hours after operation, and clean oil filters and suction pipes regularly. Oil contamination should be eliminated regularly at the bottom of the tank.
(5) Often check the wear of cylinder and screw, and replace it if necessary.
(6) Regular inspection of screw tail seal ring wear, if necessary replacement.
(7) Check gears, bearings and oil seals of gearbox once a year (if there is no abnormal situation, the maintenance period can be extended appropriately).
(8) When stopping for a long time, pay attention to prevent rust and pollution.