PP PE Plastic Film Pelletizing Line

Compactor cutter can effectively dry materials, agglomerate, friction self-heating, high-speed forced feed into the screw after the material reaches a certain temperature

Product Details

PP PE Plastic Film Pelletizing Line description:

The production line adopts European design and advanced technology. It is mainly used for clean PE PP films, scraps and crushed, washed, dried HDPE/LDPE/PP/PS materials. The material is sent to the compactor cutter through the conveyor belt, and fed into the single screw extruder by high speed rotation of the compactor cutter;

The screw is specially designed for cutting and compacting plastics. It has the advantages of fast feeding, wear resistance, etc., with natural exhaust and vacuum system; It can effectively remove the moisture inside the material; this extruder uses ceramic heating ring, durable and easy to maintain.

Compactor cutter can effectively dry materials, agglomerate, friction self-heating, high-speed forced feed into the screw after the material reaches a certain temperature, improve the output and reduce the heating of the screw to the plastic, accelerate the plasticization process; effective Energy savings;

Hydraulic screen changer is installed on the extruder die-head to effectively remove the impurities in the material; different quality of the finished product can be produced through the use of different mesh filters;

The special design of the extruder head part can effectively remove the hidden moisture inside the material and improve the granulation quality;

It can also be equipped with two stage granulation system, using two extruders to pass the material through secondary filtration, making the produced particles cleaner and higher quality;

It also can be equipped with a vibrating screen to sort out unqualified products; making the product particle size uniform and nice looking. The follow-up pelleting type can choose to strand/noodle pelletizer, or die face cutting (water ring pelletizer) to save labor and reduce waste;

The production line can be specially designed according to the cleanness of the customer's raw material and the quality requirement of the final product;

   


Here is PP PE Plastic Film Pelletizing Line Drawing:

image001


PP PE Plastic Film Pelletizing Line Main Technical Parameters:

Model

SJ100

SJ120

SJ150

SJ175

SJ200

screw  diameter(mm)

22-37

37-75

45-110

55-132

75-160

screw  L/D

φ100

φ120

φ150

φ175

φ200

main  motor(kw)

20-33

20-33

20-33

20-33

20-33

dosing  screw motor power(kw)

0.75-1.1

1.1-1.5

1.5-2.2

1.5-2.2

2.2-3

exhaust  method

vacuum  or natural exhaust

vacuum  or natural exhaust

vacuum  or natural exhaust

vacuum  or natural exhaust

vacuum  or natural exhaust

screen  changer

plate  or pillar type hydraulic screen changer

plate  or pillar type hydraulic screen changer

plate  or pillar type hydraulic screen changer

plate  or pillar type hydraulic screen changer

plate  or pillar type hydraulic screen changer

pelletizing  type

water-ring  or noodle pelletizer

water-ring  or noodle pelletizer

water-ring  or noodle pelletizer

water-ring  or noodle pelletizer

water-ring  or noodle pelletizer

capacity(kg/h)

100-200

200-300

300-500

500-600

600-800


Maintenance of Plastic Granulator Equipment

(1) The cooling water used in the plastic granulator system is usually soft water. The hardness is less than 5DH and the carbonate-free hardness is less than 2DH, with a value of 7.5-8.

(2) When starting, attention should be paid to safe start-up. At the same time, should pay attention to open the feeding device first. When stopping, the feeding device should be stopped first. It is strictly forbidden to run the material empty.

(3) After shutdown, the barrel, screw and main and auxiliary material feeding outlet should be cleaned in time, and the existence of caking blocks should be checked. Low temperature start-up and belt reversal should be strictly prohibited.

(4) Daily attention should be paid to the lubrication of each lubrication point and two tandem thrust bearings, whether there is leakage of screw sealing joint, etc. If problems are found, the machine should be stopped and repaired in time.

(5) Always pay attention to the abrasion of brushes in motors, and timely maintenance or replacement.


Hot Tags: PP PE plastic film pelletizing line, China, manufacturers, suppliers, factory, buy, cheap, quotation, low price, made in China

Inquiry

You Might Also Like