The extruding water ring die face cutting granulating line is for plastics such as LDPE, HDPE, PP, recycling granulating ( pelletizing ) .
Processing capacity from 150kg/h to 500kg/h
1. The extruding water ring die face cutting granulating line, very suitable to process PVC powder with high capacity
2. Pelletizing style: hot-cutting on mould face, even cutting ensures good shape.
3. Auxiliary machine: pellets cooling & classifying
PPPE film Compactor single stage pelletizing line Technical Parameters:
Extruder, single stage or mother-baby two stage , with hydraulic screen changer
Water ring die face cutting unit
Blowing conveyer and silo
Electric control cabinet
Maintenance of PPPE film Compactor single stage pelletizing line
(1) The cooling water used in the plastic granulator system is usually soft water. The hardness is less than 5DH and the carbonate-free hardness is less than 2DH, with a value of 7.5-8.
(2) When starting, attention should be paid to safe start-up. At the same time, should pay attention to open the feeding device first. When stopping, the feeding device should be stopped first. It is strictly forbidden to run the material empty.
(3) After shutdown, the barrel, screw and main and auxiliary material feeding outlet should be cleaned in time, and the existence of caking blocks should be checked. Low temperature start-up and belt reversal should be strictly prohibited.
(4) Daily attention should be paid to the lubrication of each lubrication point and two tandem thrust bearings, whether there is leakage of screw sealing joint, etc. If problems are found, the machine should be stopped and repaired in time.
(5) Always pay attention to the abrasion of brushes in motors, and timely maintenance or replacement.