HDPE Recycling Machine
Parts contacting with materials in PE PP washing line floating washer is made of stainless steel, stainless and no pollution to the washed materials. Full automatic design needs no adjustment during operation.
It can be making into different length according to different requirement. This device is separate by proportion. It can adjust based on different material, reach to the aim of washing and separate.
PE PP washing line floating washer was widely used in waste plastic washer. It is mainly used for wash and separate plastic bottle, sheet and film. It will separate based on the different density of material.
This machine’s water inlet pipe inter diameter is Ø25, water pressure is 1.5KG, and the water consumption is about 2.5 T/h.
Wet Grinding Unit
This unit is specially designed for PP,PE film, bottle, barrel etc using paddle type blades, which have following characteristics: in-put smoothly and out-put stably, low power consumption, low noise and vibration, strong structure, low maintenance cost. It’s designed by a wet grinding method, which not only using the water impact to enforce the cleanness of PP, PE scraps, also less the blades' suffer. Due to cold water decreased the high temperature which caused by the friction effect, and it’s long lasting the blades’ life too.
Gravity Separation by Water Unit
The smashed flakes are mixed with sands, earth; this unit is using the gravity difference of PP, PE and the contamination, and using water (gravity 1) as a media to let contamination down and PE, PP floating above the water. This effective will make PP,PE more purified, and after collected PE,PP scraps and dried it, and this is a standardized productions.
Friction Washing with Hot Solution Unit
After finished above functional Group unit, the quality’s range of total impurities content less 200ppm (2/10000) already. Also, focus on downstream markets’ quality demanding stricter, this unit’s aim to the ultimate purity of the PE, PP scraps. Using of 3 major rinsing effective, which are mechanical, chemical, thermal, achieved total impurities under the range of 100ppm (1/10000)
Drying & Packing Unit
Go through the centrifuge and thermal dryer equipment, the dry degree shall less than 1% before the packing, And packaging equipment included a collector tank, which also can be equipped with a transfer conveyor, and pelletizing line, finally, we can assembly a full auto recycling line to recycle the PP,PE material and make them into clean PP,PE granules.
Solution Circulation & Treatment System
Our formula detergent with following characteristics; power rinse effectiveness, low bubbles, low residue, easy management of wasted water etc. Detergent functioned in a closed circulation system, which equipped self-clean system that maintaining the detergent density in right time and right quantity for keeping the rinse cleanness.
For ensure the effectiveness of rinsing, the clean water used in the washing unit can be re-used, and this function will achieve the water consumption to a most economic condition.
HDPE Recycling Machine flow chart:
pp pe washing line technical parameters:
Packing and shipping:
Zhangjiagang Lianguan Recycling Science Technology Co., Ltd. has been in waste plastic washing recycling line for many years. The company has got the ISO9001,CE,SGS certification.
LIANGUAN RECYCLING provides complete pe pp film washing line, pe pp lump recycling line solutions, such as belt conveyor, metal detector, single double shaft shredder, film crusher with water, floating tank, hot washer, high speed friction washer, special film squeezer or film densifier machine, centrifugal dewatering machine, drying system, storage silo, etc.
including of water treatment and other machines which are suitable for waste plastic films, pe pp lumps, etc.
LIANGUAN RECYCLING provides suitable machine according to customer’s requirement. And has rich experience in Southeast Asia, the Middle East, Africa, Europe, America and Oceania.
Welcome to LIANGUAN RECYCLING COMPANY, Jinfeng town,Zhangjiagang City, China.
In woodern cases, woodern splints, wrap film and other specialized packaging film, to ensure that the machine impact damage in the long time of land and sea transport, thus reaching the customer factory intact.
Q: Are you a factory or a trading company?
A: As a professional manufacturer, we have been in PE PP recycling machine industry for more than 30 years, our factory is in Jinfeng Town, Zhangjiagang city which is near shanghai and wuxi.
Q: Do you have any certifications?
A: Yes, we have ISO, CE, SGS.
Q: What’s your guarantee or the warranty of the quality if we buy your machines?
A: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q:When can I get my machine after I paid?
A: Normally production time is around 45-75days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
Q: How to install my machines when it arrives?how much the cost?
A: We will send our engineers to your factory to install the machines and train your staff how to operate the machines.
Customer pay for visa, round air tickets, accommodation and USD100/day/person.
Q: How long time for installation?
A: According your machines order,we will send one or two engineers to your plant,it will take about 15 days to 30 days.
Q: How about the spare parts?
A: We will send one year enough easy broken spare parts together with the machines,shipping together. During the warranty time,we will supply the spare parts at our cost price including the delivery fees.
When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our factory,and see the machine running.
1.We can design the machines according your requirements(material condition, the kinds of waste plastic bottles,and so on), at the same time we will give you our professional suggestion, as you know, we have been in this industry for many years.
1. We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2. When you finish the Preparation conditions,our fast and professional after sale service engineer team will go to your factory to install the machine,
give you the operating manual,and train your employee until they can operate the machine well.
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4. We provide one year warranty
5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6. 12 Months guarantee and life-long technical support.
7. Your business relationship with us will be confidential to any third party.
8. Good after-sale service offered, please get back to us if you got any questions.
We have the single quality department, that make sure the material of the raw materials is good, and ensure the machine running smoothly.
If you want to know more information about the product,You can send an inquiry, we will solve any of your problems and send you running video.